Sinopec DOT 3 Synthetic Brake Fluid

Sinopec DOT 3 Synthetic Brake Fluid

Sinopec DOT 3 Synthetic Brake Fluid is formulated using a blend of synthetic glycol ether with selected additives. It meets the requirements of the DOT 3 specification to give excellent broke and clutch performance. Moreover it avoiding the problems of vapor lock and brake fade.

Features & Benefits
Application
Typical Data
Industry & OEM Specifications

Features & Benefits:

High performance of equilibrium reflux boiling point to resist the heat generated in high speed and overload vehicles while breaking.
Excellent fluidity at low temperature.
Works well with composite brake systems, in particular suitable for the rubber components, and protection the metal components.
Excellent anti-rust, anti- corrosion, anti - oxidation and compatibility with rubber.

Application:

Sinopec DOT 3 Synthetic Brake Fluid is suitable for use in:

Hydraulic disc, drum and anti-skid brakes and clutch systems of all passenger cars and commercial vehicles that require a DOT 3 or DOT 3 performance synthetic fluid.

Caution : do not use where a mineral oil-based fluid or a DOT 5 silicone - based fluid is required.

Typical Data:

Equilibrium reflux boiling point(ERBP), °C, ISO 4925		248
Wet ERBP, °C, ISO 4925		150
Kinematic viscosity, ISO 4925
cSt@-40°C		1170
cSt@100°C		2.115
pH, ISO 4925		9.0
Corrosion, 120h@ 100°C. mass change of metal strips. mg/ cm2, ISO 4925
Tinned Iron		0.00
Steel		0.00
Aluminum		0.00
Cast Iron		0.00
Brass		0.12
Copper		0.10
Effect on rubber, ISO 4925		Pass
Styrene Butadiene Rubber (SBR) @120°C		-
Cup diameter, Increase, mm		0.75
Hardness Change. IRHD		6
Ethylene Propylene Diene Monomer (EPDM) @120°C
volume Change,%		3.10
Hardness Change,IRHD		3

** These data are given as an indication of typical values and not as exact specifications.

Industry & OEM Specifications:

Sinopec DOT 3 Synthetic Brake Fluid meets the perfomance requirements of the following industry specifications
FMVSS No.116	DOT3
GB'	12981-2012HZY3